Part Number: Generic Replacement Kit (Please check individual component specs)
Bundle Includes: 2 x Electric Heating Elements, 1 x Magnesium Anode Rod, 1 x Heavy Duty Element Wrench Socket, 2 x Rubber Gaskets, 2 x Mounting Screws
Fitment: Universal fit for most 120V or 240V electric water heaters including brands like Rheem, A.O. Smith, Bradford White, Kenmore, State, Reliance, and Suburban RV (please verify your heater voltage and wattage before purchase)
Type: Complete maintenance and repair kit for electric storage water heaters (aftermarket replacement parts)
Key Features
-
Complete 6-Piece Kit includes everything needed for a full water heater tune-up: dual heating elements, anode rod, removal tool, and hardware
-
Dual Heating Elements designed for simultaneous or sequential replacement to restore full heating capacity and efficiency
-
Magnesium Anode Rod acts as a sacrificial metal to attract corrosive elements, preventing tank rust and extending water heater lifespan
-
Heavy Duty Dual Hex Wrench Socket (1-1/16 inch and 1-1/2 inch) allows easy removal and installation of both elements and anode rods without stripping threads
-
High Grade Materials with stainless steel heating tubes, durable magnesium anode, and corrosion-resistant gaskets ensure long-lasting performance
-
Tool-Free Installation (after initial setup) — once the wrench is used, future replacements are quick and straightforward
What It Fixes
This kit resolves common water heater issues such as:
-
No hot water or slow recovery time caused by burned-out elements
-
Rusty or discolored water indicating corroded tank walls or failed anode rod
-
Leaks around the element ports due to worn-out gaskets
-
Loud popping or rumbling noises from sediment buildup and overheating
-
Short cycling or thermostat malfunctions triggered by faulty heating elements
Compatible Models (Partial List)
-
Rheem: Marathon, Performance, Value Line, 40, 50, 75, 80, 100 gallon models
-
A.O. Smith: Signature, ProMax, Master, Performance, and Reliance branded electric water heaters
-
Suburban RV: SW4DE, SW6DE, SW6DEL, SW10, SW10DE, SW12DE, SW12DEL
-
Kenmore: 153, 154, 155, 156, 157, 158, 159 series electric water heaters
-
Bradford White, State, Reliance, EcoTemp, Whirlpool, GE, and many other standard residential electric water heaters
If your model is not listed, check your heater nameplate for voltage (120V/240V), wattage (1500W, 2000W, 3000W, 4500W), and element type (screw-in). Contact us with your heater specs for fitment confirmation.
Specifications
-
Heating Element: 240V 4500W (or 120V 1500W, confirm based on your model)
-
Element Material: Stainless steel sheathed
-
Anode Rod: Magnesium alloy, 9.25 inches x 3/4 inch NPT
-
Wrench Socket: Dual hex (1-1/16" and 1-1/2"), carbon steel
-
Gaskets: Rubber, 3.5 inches OD
-
Screws: Galvanized, 1/4 x 1.5 inches
-
Package: 1 x 6-Piece Water Heater Repair Kit
Installation and Safety Note
WARNING: Before starting, turn off the power to the water heater at the circuit breaker and close the cold water supply valve. Open a hot water faucet to relieve pressure. Use the included wrench to unscrew the old element or anode rod, clean the port threads, apply Teflon tape if needed, and install the new components securely. Always test for leaks before restoring power.
Compatibility Disclaimer
This is an aftermarket replacement kit designed for universal compatibility. Rheem, A.O. Smith, Kenmore, Suburban, and other brand names are used only to indicate compatibility. This product is not affiliated with or endorsed by those manufacturers.